Moin Claus!
Das sieht schon recht vielversprechend aus. Die PCTV wird erkannt und der Treiber em28174 geladen (ab 8.179).
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.3.195.1 (devel@nightbuild-rpi) (gcc version 4.9.2 (Raspbian 4.9.2-10) ) #2 PREEMPT Tue Feb 2 11:00:16 CET 2016
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[ 0.000000] Machine: BCM2708
[ 0.000000] cma: Reserved 8 MiB at 0x17400000
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 98304
[ 0.000000] free_area_init_node: node 0, pgdat c0aa9258, node_mem_map d70a0000
[ 0.000000] Normal zone: 864 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 98304 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 97440
[ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=984 bcm2708.boardrev=0xf bcm2708.serial=0x67b74af2 smsc95xx.macaddr=B8:27:EB:B7:4A:F2 bcm2708_fb.fbswap=1 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 root=UUID=349d263b-348f-4e83-a113-d1ed53de0b94 splash=silent quiet nodialog smsc95xx.turbo_mode=N dwc_otg.lpm_enable=0
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 365916K/393216K available (7831K kernel code, 425K rwdata, 2280K rodata, 396K init, 746K bss, 19108K reserved, 8192K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xd8800000 - 0xff000000 ( 616 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .text : 0xc0008000 - 0xc09e80f8 (10113 kB)
[ 0.000000] .init : 0xc09e9000 - 0xc0a4c000 ( 396 kB)
[ 0.000000] .data : 0xc0a4c000 - 0xc0ab6614 ( 426 kB)
[ 0.000000] .bss : 0xc0ab6614 - 0xc0b70e40 ( 747 kB)
[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:522
[ 0.000027] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
[ 0.000075] Switching to timer-based delay loop, resolution 1000ns
[ 0.000362] Console: colour dummy device 80x30
[ 0.000580] console [tty0] enabled
[ 0.000608] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=10000)
[ 0.000633] pid_max: default: 32768 minimum: 301
[ 0.000992] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001018] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.002028] Initializing cgroup subsys memory
[ 0.002088] Initializing cgroup subsys devices
[ 0.002120] Initializing cgroup subsys freezer
[ 0.002148] Initializing cgroup subsys net_cls
[ 0.002172] Initializing cgroup subsys blkio
[ 0.002266] CPU: Testing write buffer coherency: ok
[ 0.002346] ftrace: allocating 23540 entries in 70 pages
[ 0.132353] Setting up static identity map for 0x722770 - 0x7227cc
[ 0.134875] devtmpfs: initialized
[ 0.141730] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[ 0.144064] xor: measuring software checksum speed
[ 0.242123] arm4regs : 971.600 MB/sec
[ 0.342204] 8regs : 491.600 MB/sec
[ 0.442331] 32regs : 598.800 MB/sec
[ 0.442351] xor: using function: arm4regs (971.600 MB/sec)
[ 0.442415] pinctrl core: initialized pinctrl subsystem
[ 0.443270] NET: Registered protocol family 16
[ 0.448595] DMA: preallocated 4096 KiB pool for atomic coherent allocations
[ 0.472479] cpuidle: using governor ladder
[ 0.502532] cpuidle: using governor menu
[ 0.503033] bcm2708.uart_clock = 3000000
[ 0.503087] of_platform_populate failed: -22
[ 0.507368] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 0.507395] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.507435] mailbox: Broadcom VideoCore Mailbox driver
[ 0.507574] bcm2708_vcio: mailbox at f200b880
[ 0.508074] bcm_power: Broadcom power driver
[ 0.508102] bcm_power_open() -> 0
[ 0.508115] bcm_power_request(0, 8)
[ 0.533804] bcm_mailbox_read -> 00000080, 0
[ 0.533823] bcm_power_request -> 0
[ 0.533994] Serial: AMBA PL011 UART driver
[ 0.534190] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
[ 0.774668] raid6: int32x1 47 MB/s
[ 0.944003] raid6: int32x2 69 MB/s
[ 1.114523] raid6: int32x4 94 MB/s
[ 1.285064] raid6: int32x8 100 MB/s
[ 1.285087] raid6: using algorithm int32x8 (100 MB/s)
[ 1.285099] raid6: using intx1 recovery algorithm
[ 1.285908] SCSI subsystem initialized
[ 1.286240] usbcore: registered new interface driver usbfs
[ 1.286373] usbcore: registered new interface driver hub
[ 1.286594] usbcore: registered new device driver usb
[ 1.288796] Switched to clocksource stc
[ 1.341370] FS-Cache: Loaded
[ 1.341822] CacheFiles: Loaded
[ 1.362070] NET: Registered protocol family 2
[ 1.363514] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.363616] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.363718] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.363807] TCP: reno registered
[ 1.363835] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 1.363869] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 1.364229] NET: Registered protocol family 1
[ 1.364883] RPC: Registered named UNIX socket transport module.
[ 1.364913] RPC: Registered udp transport module.
[ 1.364924] RPC: Registered tcp transport module.
[ 1.364935] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.365404] Trying to unpack rootfs image as initramfs...
[ 5.921859] Freeing initrd memory: 3468K (d7c8d000 - d7ff0000)
[ 5.922638] bcm2708_dma: DMA manager at f2007000
[ 5.922818] bcm2708_gpio: bcm2708_gpio_probe c0a5afb0
[ 5.923446] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[ 5.925253] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 5.925427] audit: initializing netlink subsys (disabled)
[ 5.925531] audit: type=2000 audit(5.830:1): initialized
[ 5.946042] FS-Cache: Netfs 'nfs' registered for caching
[ 5.947799] NFS: Registering the id_resolver key type
[ 5.947902] Key type id_resolver registered
[ 5.947921] Key type id_legacy registered
[ 5.949654] SGI XFS with security attributes, no debug enabled
[ 5.957219] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 5.957643] io scheduler noop registered
[ 5.957684] io scheduler deadline registered
[ 5.957814] io scheduler cfq registered (default)
[ 5.959853] BCM2708FB: allocated DMA memory 57800000
[ 5.959935] BCM2708FB: allocated DMA channel 0 @ f2007000
[ 5.985065] Console: switching to colour frame buffer device 240x61
[ 6.005959] bcm2708-dmaengine bcm2708-dmaengine: Load BCM2835 DMA engine driver
[ 6.006532] uart-pl011 dev:f1: no DMA platform data
[ 6.007422] vc-cma: Videocore CMA driver
[ 6.007449] vc-cma: vc_cma_base = 0x00000000
[ 6.007463] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
[ 6.007474] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
[ 6.023380] brd: module loaded
[ 6.032043] loop: module loaded
[ 6.032568] vchiq: vchiq_init_state: slot_zero = 0xd7400000, is_master = 0
[ 6.033837] Loading iSCSI transport class v2.0-870.
[ 6.035348] usbcore: registered new interface driver smsc95xx
[ 6.035532] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 6.235850] Core Release: 2.80a
[ 6.235889] Setting default values for core params
[ 6.235939] Finished setting default values for core params
[ 6.436149] Using Buffer DMA mode
[ 6.436178] Periodic Transfer Interrupt Enhancement - disabled
[ 6.436192] Multiprocessor Interrupt Enhancement - disabled
[ 6.436206] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 6.436225] Dedicated Tx FIFOs mode
[ 6.436781] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xd7814000 dma = 0x57814000 len=9024
[ 6.436819] FIQ FSM acceleration enabled for :
[ 6.436819] Non-periodic Split Transactions
[ 6.436819] Periodic Split Transactions
[ 6.436819] High-Speed Isochronous Endpoints
[ 6.436851] dwc_otg: Microframe scheduler enabled
[ 6.436922] WARN::hcd_init_fiq:412: FIQ on core 0 at 0xc05ad1a0
[ 6.436944] WARN::hcd_init_fiq:413: FIQ ASM at 0xc05ad47c length 36
[ 6.436976] WARN::hcd_init_fiq:438: MPHI regs_base at 0xd8ba6000
[ 6.437010] dwc_otg bcm2708_usb: DWC OTG Controller
[ 6.437071] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
[ 6.437141] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
[ 6.437185] Init: Port Power? op_state=1
[ 6.437196] Init: Power Port (0)
[ 6.437611] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 6.437639] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.437657] usb usb1: Product: DWC OTG Controller
[ 6.437673] usb usb1: Manufacturer: Linux 3.19.3.195.1 dwc_otg_hcd
[ 6.437689] usb usb1: SerialNumber: bcm2708_usb
[ 6.439152] hub 1-0:1.0: USB hub found
[ 6.439289] hub 1-0:1.0: 1 port detected
[ 6.440200] dwc_otg: FIQ enabled
[ 6.440224] dwc_otg: NAK holdoff enabled
[ 6.440236] dwc_otg: FIQ split-transaction FSM enabled
[ 6.440294] Module dwc_common_port init
[ 6.440872] usbcore: registered new interface driver usb-storage
[ 6.441359] mousedev: PS/2 mouse device common for all mice
[ 6.442217] usbcore: registered new interface driver usbtouchscreen
[ 6.443125] bcm2835-cpufreq: min=700000 max=700000
[ 6.443578] Driver 'mmcblk' needs updating - please use bus_type methods
[ 6.443697] sdhci: Secure Digital Host Controller Interface driver
[ 6.443715] sdhci: Copyright(c) Pierre Ossman
[ 6.443989] mmc-bcm2835 mmc-bcm2835.0: mmc_debug:0
[ 6.444018] mmc-bcm2835 mmc-bcm2835.0: DMA channels allocated
[ 6.479203] sdhci-pltfm: SDHCI platform and OF driver helper
[ 6.479755] ledtrig-cpu: registered to indicate activity on CPUs
[ 6.479953] hidraw: raw HID events driver (C) Jiri Kosina
[ 6.480305] usbcore: registered new interface driver usbhid
[ 6.480325] usbhid: USB HID core driver
[ 6.480726] TCP: cubic registered
[ 6.480762] Initializing XFRM netlink socket
[ 6.480823] NET: Registered protocol family 17
[ 6.481049] Key type dns_resolver registered
[ 6.489804] registered taskstats version 1
[ 6.505347] Btrfs loaded
[ 6.505685] vc-sm: Videocore shared memory driver
[ 6.505718] [vc_sm_connected_init]: start
[ 6.507075] [vc_sm_connected_init]: end - returning 0
[ 6.509732] Freeing unused kernel memory: 396K (c09e9000 - c0a4c000)
[ 6.526975] mmc0: host does not support reading read-only switch, assuming write-enable
[ 6.529354] mmc0: new high speed SDHC card at address b368
[ 6.539371] mmcblk0: mmc0:b368 NCard 14.8 GiB
[ 6.541580] mmcblk0: p1 p2
[ 6.669207] Indeed it is in host mode hprt0 = 00021501
[ 6.959050] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 6.959277] Indeed it is in host mode hprt0 = 00001101
[ 7.269594] usb 1-1: New USB device found, idVendor=0424, idProduct=9512
[ 7.269633] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.271146] hub 1-1:1.0: USB hub found
[ 7.271353] hub 1-1:1.0: 3 ports detected
[ 7.559165] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 7.659599] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 7.659639] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.663146] smsc95xx v1.0.4
[ 7.739035] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:b7:4a:f2
[ 7.761248] random: udevadm urandom read with 75 bits of entropy available
[ 7.819114] usb 1-1.2: new full-speed USB device number 4 using dwc_otg
[ 7.936144] usb 1-1.2: New USB device found, idVendor=21ce, idProduct=2519
[ 7.936187] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 7.936205] usb 1-1.2: Product: USB Receiver
[ 7.936221] usb 1-1.2: Manufacturer:
[ 7.957716] input: USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:21CE:2519.0001/input/input0
[ 8.009834] hid-generic 0003:21CE:2519.0001: input,hidraw0: USB HID v1.10 Keyboard [ USB Receiver] on usb-bcm2708_usb-1.2/input0
[ 8.047498] input: USB Receiver as /devices/platform/bcm2708_usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:21CE:2519.0002/input/input1
[ 8.100671] hid-generic 0003:21CE:2519.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [ USB Receiver] on usb-bcm2708_usb-1.2/input1
[ 8.179125] usb 1-1.3: new high-speed USB device number 5 using dwc_otg
[ 8.280400] usb 1-1.3: New USB device found, idVendor=2013, idProduct=024c
[ 8.280444] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.280462] usb 1-1.3: Product: PCTV 460e
[ 8.280479] usb 1-1.3: Manufacturer: PCTV Systems
[ 8.280496] usb 1-1.3: SerialNumber: 00000010APRW
[ 9.157625] BTRFS: device fsid 349d263b-348f-4e83-a113-d1ed53de0b94 devid 1 transid 104 /dev/mmcblk0p2
[ 9.161359] BTRFS info (device mmcblk0p2): disk space caching is enabled
[ 9.193451] BTRFS: detected SSD devices, enabling SSD mode
[ 9.199139] BTRFS: checking UUID tree
[ 12.273938] random: nonblocking pool is initialized
[ 12.574236] BTRFS info (device mmcblk0p2): disk space caching is enabled
[ 18.141962] systemd-udevd[375]: starting version 215
[ 19.035354] bcm2708_i2c_init_pinmode(1,2)
[ 19.035393] bcm2708_i2c_init_pinmode(1,3)
[ 19.036457] bcm2708_i2c bcm2708_i2c.1: BSC1 Controller at 0x20804000 (irq 79) (baudrate 100000)
[ 19.477335] Linux video capture interface: v2.00
[ 19.477387] WARNING: You are using an experimental version of the media stack.
[ 19.477387] As the driver is backported to an older kernel, it doesn't offer
[ 19.477387] enough quality for its usage in production.
[ 19.477387] Use it with care.
[ 19.477387] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 19.477387] 1555f3bf5cc172e7d23c2b8db10d656d15bec13e [media] saa7164: fix compiler warning
[ 19.477387] ebf984bb151e9952cccd060d3aba0b4d30a87e81 [media] v4l2: replace s_mbus_fmt by set_fmt in bridge drivers
[ 19.477387] 5eab4983777ba913efb42dd0f177b0dcdbd4f3d9 [media] v4l2: replace try_mbus_fmt by set_fmt in bridge drivers
[ 19.477387] experimental: 82186b8b60da1c55e956c89d78a8de4e670d5a29 experimental/ddbridge: Include LNBH25 driver in build process.
[ 19.477387] v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
[ 19.770843] em28xx: New device PCTV Systems PCTV 460e @ 480 Mbps (2013:024c, interface 0, class 0)
[ 19.770886] em28xx: DVB interface 0 found: isoc
[ 19.771152] em28xx: chip ID is em28174
[ 19.781693] i2c /dev entries driver
[ 20.201120] em28174 #0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x09ec3def
[ 20.201155] em28174 #0: EEPROM info:
[ 20.201172] em28174 #0: microcode start address = 0x0004, boot configuration = 0x01
[ 20.228460] em28174 #0: No audio on board.
[ 20.228503] em28174 #0: 500mA max power
[ 20.228521] em28174 #0: Table at offset 0x39, strings=0x1aa0, 0x14ba, 0x1ace
[ 20.230550] em28174 #0: Identified as PCTV DVB-S2 Stick (460e) (card=80)
[ 20.230588] em28174 #0: dvb set to isoc mode.
[ 20.240500] usbcore: registered new interface driver em28xx
[ 20.398188] WARNING: You are using an experimental version of the media stack.
[ 20.398188] As the driver is backported to an older kernel, it doesn't offer
[ 20.398188] enough quality for its usage in production.
[ 20.398188] Use it with care.
[ 20.398188] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
[ 20.398188] 1555f3bf5cc172e7d23c2b8db10d656d15bec13e [media] saa7164: fix compiler warning
[ 20.398188] ebf984bb151e9952cccd060d3aba0b4d30a87e81 [media] v4l2: replace s_mbus_fmt by set_fmt in bridge drivers
[ 20.398188] 5eab4983777ba913efb42dd0f177b0dcdbd4f3d9 [media] v4l2: replace try_mbus_fmt by set_fmt in bridge drivers
[ 20.398188] experimental: 82186b8b60da1c55e956c89d78a8de4e670d5a29 experimental/ddbridge: Include LNBH25 driver in build process.
[ 20.398188] v4l-dvb-saa716x: d7e98fc592305a600909003da2b7cc4338242511 saa716x_ff: Do not return on command ready timeout
[ 20.416110] em28174 #0: Registering input extension
[ 20.499065] Registered IR keymap rc-pinnacle-pctv-hd
[ 20.499839] input: em28xx IR (em28174 #0) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/rc/rc0/input2
[ 20.500791] rc0: em28xx IR (em28174 #0) as /devices/platform/bcm2708_usb/usb1/1-1/1-1.3/rc/rc0
[ 20.501289] em28174 #0: Input extension successfully initalized
[ 20.501316] em28xx: Registered (Em28xx Input Extension) extension
[ 20.669114] pcm512x 1-004d: Failed to reset device: -5
[ 20.669333] pcm512x: probe of 1-004d failed with error -5
[ 20.671917] pcm512x 1-004c: Failed to reset device: -5
[ 20.672120] pcm512x: probe of 1-004c failed with error -5
[ 25.863156] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 27.580505] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 38.799364] input: eventlircd as /devices/virtual/input/input3
Allerdings fehlt mir nach wie vor der Empfänger im VDR. Wo müsste ich den im OS-Menü sehen? Oder wird der nicht automatisch eingebunden?
Bei der Installation werden DVBS/C/T für die Kanalliste gescannt. Das cheint bei mir fehlgeschlagen zu sein.
Ciao, Georg