Ich hab's nochmal auf ner anderen wetek probiert, und habe absichtlich das amlhddevice Plugin vorher rausgelöscht.
Der aktuelle Effekt bleibt.
Zum Einen scheint eines der wlan Module Probleme zu bereiten, zum Anderen beim Laden der SMP Funktionalität.
Hat das Server-only Image den/die selben Kernel/.config?
Denn bei der Server-only Variante gibt es diese Fehlermeldungen nicht.
Ich versuche mal noch mehr Infos zu sammeln...
-Wanninger
NACHTRAG:
Das aktuelle MLD-5.0 server-only Image hat den gleichen Fehler.
Ich glaube, dass hier noch etwas an der Kernelconfig bzw. an den Modulen hängt...
[ 8.826270@0] ------------[ cut here ]------------
[ 8.826295@0] WARNING: at kernel/smp.c:382 smp_call_function_many+0x2d4/0x2e0()
[ 8.826300@0] Modules linked in:
[ 8.826311@0] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.76 #3
[ 8.826344@0] [<c0013c78>] (unwind_backtrace+0x0/0xec) from [<c00115dc>] (show_stack+0x10/0x14)
[ 8.826364@0] [<c00115dc>] (show_stack+0x10/0x14) from [<c002a1dc>] (warn_slowpath_common+0x54/0x6c)
[ 8.826376@0] [<c002a1dc>] (warn_slowpath_common+0x54/0x6c) from [<c002a290>] (warn_slowpath_null+0x1c/0x24)
[ 8.826387@0] [<c002a290>] (warn_slowpath_null+0x1c/0x24) from [<c006fd28>] (smp_call_function_many+0x2d4/0x2e0)
[ 8.826399@0] [<c006fd28>] (smp_call_function_many+0x2d4/0x2e0) from [<c006fd60>] (smp_call_function+0x2c/0x34)
[ 8.826409@0] [<c006fd60>] (smp_call_function+0x2c/0x34) from [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc)
[ 8.826420@0] [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc) from [<c001ad28>] (meson_clk_set_rate+0x134/0x19c)
[ 8.826428@0] [<c001ad28>] (meson_clk_set_rate+0x134/0x19c) from [<c001ae30>] (clk_set_rate+0xa0/0xc4)
[ 8.826447@0] [<c001ae30>] (clk_set_rate+0xa0/0xc4) from [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8)
[ 8.826460@0] [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8) from [<c043283c>] (meson_cpufreq_target+0x24/0x3c)
[ 8.826473@0] [<c043283c>] (meson_cpufreq_target+0x24/0x3c) from [<c039d078>] (cpufreq_governor_performance+0x28/0x6c)
[ 8.826493@0] [<c039d078>] (cpufreq_governor_performance+0x28/0x6c) from [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0)
[ 8.826504@0] [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0) from [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c)
[ 8.826515@0] [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c) from [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac)
[ 8.826526@0] [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac) from [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc)
[ 8.826543@0] [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc) from [<c02f2750>] (subsys_interface_register+0x94/0xd8)
[ 8.826556@0] [<c02f2750>] (subsys_interface_register+0x94/0xd8) from [<c039aae8>] (cpufreq_register_driver+0x88/0x190)
[ 8.826568@0] [<c039aae8>] (cpufreq_register_driver+0x88/0x190) from [<c02f3e78>] (driver_probe_device+0x7c/0x230)
[ 8.826578@0] [<c02f3e78>] (driver_probe_device+0x7c/0x230) from [<c02f40fc>] (__driver_attach+0x8c/0x90)
[ 8.826589@0] [<c02f40fc>] (__driver_attach+0x8c/0x90) from [<c02f2374>] (bus_for_each_dev+0x6c/0xa0)
[ 8.826598@0] [<c02f2374>] (bus_for_each_dev+0x6c/0xa0) from [<c02f369c>] (bus_add_driver+0x1c0/0x24c)
[ 8.826608@0] [<c02f369c>] (bus_add_driver+0x1c0/0x24c) from [<c02f4710>] (driver_register+0x78/0x140)
[ 8.826619@0] [<c02f4710>] (driver_register+0x78/0x140) from [<c02f5750>] (platform_driver_probe+0x18/0x9c)
[ 8.826631@0] [<c02f5750>] (platform_driver_probe+0x18/0x9c) from [<c00085ec>] (do_one_initcall+0x100/0x160)
[ 8.826649@0] [<c00085ec>] (do_one_initcall+0x100/0x160) from [<c0796bd8>] (kernel_init_freeable+0x138/0x214)
[ 8.826666@0] [<c0796bd8>] (kernel_init_freeable+0x138/0x214) from [<c05a1194>] (kernel_init+0x8/0x160)
[ 8.826679@0] [<c05a1194>] (kernel_init+0x8/0x160) from [<c000df58>] (ret_from_fork+0x14/0x3c)
[ 8.826685@0] ---[ end trace d39cd155352ac6c3 ]---
[ 8.826690@0] ------------[ cut here ]------------
[ 8.826699@0] WARNING: at kernel/smp.c:244 smp_call_function_single+0x150/0x198()
[ 8.826702@0] Modules linked in:
[ 8.826710@0] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.10.76 #3
[ 8.826721@0] [<c0013c78>] (unwind_backtrace+0x0/0xec) from [<c00115dc>] (show_stack+0x10/0x14)
[ 8.826733@0] [<c00115dc>] (show_stack+0x10/0x14) from [<c002a1dc>] (warn_slowpath_common+0x54/0x6c)
[ 8.826744@0] [<c002a1dc>] (warn_slowpath_common+0x54/0x6c) from [<c002a290>] (warn_slowpath_null+0x1c/0x24)
[ 8.826755@0] [<c002a290>] (warn_slowpath_null+0x1c/0x24) from [<c006f908>] (smp_call_function_single+0x150/0x198)
[ 8.826764@0] [<c006f908>] (smp_call_function_single+0x150/0x198) from [<c006fd60>] (smp_call_function+0x2c/0x34)
[ 8.826773@0] [<c006fd60>] (smp_call_function+0x2c/0x34) from [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc)
[ 8.826781@0] [<c001a7fc>] (clk_set_rate_a9+0xbc/0xfc) from [<c001ad28>] (meson_clk_set_rate+0x134/0x19c)
[ 8.826790@0] [<c001ad28>] (meson_clk_set_rate+0x134/0x19c) from [<c001ae30>] (clk_set_rate+0xa0/0xc4)
[ 8.826801@0] [<c001ae30>] (clk_set_rate+0xa0/0xc4) from [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8)
[ 8.826811@0] [<c0432768>] (meson_cpufreq_target_locked.isra.1+0x128/0x1d8) from [<c043283c>] (meson_cpufreq_target+0x24/0x3c)
[ 8.826821@0] [<c043283c>] (meson_cpufreq_target+0x24/0x3c) from [<c039d078>] (cpufreq_governor_performance+0x28/0x6c)
[ 8.826832@0] [<c039d078>] (cpufreq_governor_performance+0x28/0x6c) from [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0)
[ 8.826843@0] [<c039b4f8>] (__cpufreq_governor+0x168/0x1f0) from [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c)
[ 8.826854@0] [<c039b6a8>] (__cpufreq_set_policy+0x128/0x21c) from [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac)
[ 8.826864@0] [<c039b9f4>] (cpufreq_add_dev_interface+0x258/0x2ac) from [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc)
[ 8.826875@0] [<c039bdb8>] (cpufreq_add_dev+0x370/0x4cc) from [<c02f2750>] (subsys_interface_register+0x94/0xd8)
[ 8.826886@0] [<c02f2750>] (subsys_interface_register+0x94/0xd8) from [<c039aae8>] (cpufreq_register_driver+0x88/0x190)
[ 8.826897@0] [<c039aae8>] (cpufreq_register_driver+0x88/0x190) from [<c02f3e78>] (driver_probe_device+0x7c/0x230)
[ 8.826907@0] [<c02f3e78>] (driver_probe_device+0x7c/0x230) from [<c02f40fc>] (__driver_attach+0x8c/0x90)
[ 8.826917@0] [<c02f40fc>] (__driver_attach+0x8c/0x90) from [<c02f2374>] (bus_for_each_dev+0x6c/0xa0)
[ 8.826926@0] [<c02f2374>] (bus_for_each_dev+0x6c/0xa0) from [<c02f369c>] (bus_add_driver+0x1c0/0x24c)
[ 8.826936@0] [<c02f369c>] (bus_add_driver+0x1c0/0x24c) from [<c02f4710>] (driver_register+0x78/0x140)
[ 8.826946@0] [<c02f4710>] (driver_register+0x78/0x140) from [<c02f5750>] (platform_driver_probe+0x18/0x9c)
[ 8.826956@0] [<c02f5750>] (platform_driver_probe+0x18/0x9c) from [<c00085ec>] (do_one_initcall+0x100/0x160)
[ 8.826966@0] [<c00085ec>] (do_one_initcall+0x100/0x160) from [<c0796bd8>] (kernel_init_freeable+0x138/0x214)
[ 8.826977@0] [<c0796bd8>] (kernel_init_freeable+0x138/0x214) from [<c05a1194>] (kernel_init+0x8/0x160)
[ 8.826988@0] [<c05a1194>] (kernel_init+0x8/0x160) from [<c000df58>] (ret_from_fork+0x14/0x3c)
[ 8.826993@0] ---[ end trace d39cd155352ac6c4 ]---
[ 8.827460@0] hdmitx: cec: CEC init
[ 8.827520@1] hdmitx: cec: CEC task process
[ 8.827764@0] input: cec_input as /devices/virtual/input/input6
[ 8.827956@0] hdmitx: cec: hdmitx_device->cec_init_ready:0x1
[ 8.828028@0] ALSA device list:
[ 8.828035@0] #0: AML-DUMMY-CODEC
[ 8.828331@0] Freeing unused kernel memory: 212K (c0796000 - c07cb000)
[ 9.242202@0] raid6: int32x1 196 MB/s
[ 9.412199@0] raid6: int32x2 267 MB/s
[ 9.582230@0] raid6: int32x4 267 MB/s
[ 9.752191@0] raid6: int32x8 293 MB/s
[ 9.752197@0] raid6: using algorithm int32x8 (293 MB/s)
[ 9.752202@0] raid6: using intx1 recovery algorithm
[ 9.753425@1] xor: measuring software checksum speed
[ 9.852162@1] arm4regs : 2046.000 MB/sec
[ 9.952158@1] 8regs : 1462.000 MB/sec
[ 10.052160@1] 32regs : 1491.600 MB/sec
[ 10.052166@1] xor: using function: arm4regs (2046.000 MB/sec)
[ 10.113274@1] bio: create slab <bio-1> at 1
[ 10.114446@1] Btrfs loaded
[ 22.018167@0] EXT3-fs (system): error: couldn't mount because of unsupported optional features (40)
[ 22.018753@0] EXT2-fs (system): error: couldn't mount because of unsupported optional features (40)
[ 22.019090@0] force enable DISCARD here for ext4 fs
[ 22.032518@1] checked enable EXT4 DISCARD here
[ 22.032537@1] EXT4-fs (system): mounting with "discard" option, but the device does not support discard
[ 22.032545@1] EXT4-fs (system): mounted filesystem with ordered data mode. Opts: (null)
[ 22.045520@0] EXT3-fs (cache): error: couldn't mount because of unsupported optional features (40)
[ 22.046089@0] EXT2-fs (cache): error: couldn't mount because of unsupported optional features (40)
[ 22.046383@0] force enable DISCARD here for ext4 fs
[ 22.061346@0] checked enable EXT4 DISCARD here
[ 22.061365@0] EXT4-fs (cache): mounting with "discard" option, but the device does not support discard
[ 22.061372@0] EXT4-fs (cache): mounted filesystem with ordered data mode. Opts: (null)
[ 22.127686@0] UDF-fs: warning (device mmcblk0): udf_fill_super: No partition found (1)
[ 22.134446@0] EXT3-fs (data): error: couldn't mount because of unsupported optional features (40)
[ 22.135000@0] EXT2-fs (data): error: couldn't mount because of unsupported optional features (40)
[ 22.135288@0] force enable DISCARD here for ext4 fs
[ 22.151102@0] checked enable EXT4 DISCARD here
[ 22.151119@0] EXT4-fs (data): mounting with "discard" option, but the device does not support discard
[ 22.151127@0] EXT4-fs (data): mounted filesystem with ordered data mode. Opts: (null)
[ 23.832455@1] cec: register fiq
[ 23.832480@1] hdmitx: cec: CEC node init
[ 23.832490@1] hdmitx: cec: cec_config: 0x0; ao_cec:0x0
[ 23.832496@1] hdmitx: cec: CEC: start poll dev
[ 23.902284@1] cec TX status: rx: 0x0; tx: 0x2
[ 23.902316@1] hdmitx: cec: CEC: poll online logic device: 0x4 BOOL: 1
[ 23.902321@1] hdmitx: cec: player_dev[0]:0x4
[ 23.902325@1] hdmitx: cec: CEC: start poll dev
[ 23.972668@1] cec TX status: rx: 0x0; tx: 0x0
[ 24.032294@1] cec TX status: rx: 0x0; tx: 0x0
[ 24.032373@1] hdmitx: cec: hw reset :logical addr:0x18
[ 24.092257@1] cec TX status: rx: 0x0; tx: 0x1
[ 24.092295@1] hdmitx: cec: hw reset :logical addr:0x18
[ 24.092299@1] cec: try 3 times
[ 24.092305@1] hdmitx: cec: CEC: poll online logic device: 0x8 BOOL: 0
[ 24.092311@1] hdmitx: cec: player_dev[1]:0x8
[ 24.092316@1] hdmitx: cec: physical address:0x2000
[ 24.092324@1] hdmitx: cec: Set logical address: 8
[ 24.092328@1] hdmitx: cec: aml_read_reg32(P_AO_DEBUG_REG0):0xf
[ 24.372306@1] cec TX status: rx: 0x0; tx: 0x2
[ 24.518218@0] hdmitx: cec: opcode:0x80, hdmitx_device->cec_func_config:0xf
[ 24.589782@0] hdmitx: cec: opcode:0x46, hdmitx_device->cec_func_config:0xf
[ 24.659042@0] hdmitx: cec: opcode:0x8c, hdmitx_device->cec_func_config:0xf
[ 24.852385@0] cec TX status: rx: 0x0; tx: 0x2
[ 25.112287@0] cec TX status: rx: 0x0; tx: 0x2
[ 25.322335@0] cec TX status: rx: 0x0; tx: 0x2
[ 25.448480@0] hdmitx: cec: opcode:0x32, hdmitx_device->cec_func_config:0xf
[ 25.832333@0] cec TX status: rx: 0x0; tx: 0x2
[ 26.082264@0] cec TX status: rx: 0x0; tx: 0x2
[ 26.183375@0] hdmitx: cec: opcode:0x0, hdmitx_device->cec_func_config:0xf
[ 26.192853@0] hdmitx: cec: cec node init: cec features ok !
[ 26.602285@0] cec TX status: rx: 0x0; tx: 0x2
[ 26.773540@1] cec TX status: rx: 0x0; tx: 0x2
[ 26.776448@1] hdmitx: cec: cec_set_menu_language:g.e.r
[ 28.227287@0] hdmitx: cec: opcode:0x0, hdmitx_device->cec_func_config:0xf
[ 35.787415@1] wetekdvb: module license 'Proprietary' taints kernel.
[ 35.787438@1] Disabling lock debugging due to kernel taint
[ 35.788695@1] wetek-dvb dvb.8: Loading ...
[ 35.811857@1] DVB: registering new adapter (Wetek_DVB_0)
[ 35.811897@1] wetek-dvb dvb.8: DVB: registering adapter 0 frontend 0 (Availink AVL6211+AV2011 DVB-S/S2)...
[ 35.815262@1] wetek-dvb dvb.8: Register ca0loop device
[ 35.815304@1] DVB: registering new adapter (Wetek_DVB_1)
[ 35.815315@1] wetek-dvb dvb.8: DVB: registering adapter 1 frontend 0 (Availink AVL6211+AV2011 DVB-S/S2)...
[ 35.816570@1] wetek-dvb dvb.8: Register ca1loop device
[ 35.816614@1] wetek-dvb dvb.8: fifo_0/2097152/4096
[ 35.818863@1] wetek-dvb dvb.8: FLUSH FIFO_0
[ 35.818872@1] wetek-dvb dvb.8: FLUSH ok
[ 35.818890@1] wetek-dvb dvb.8: fifo_1/2097152/4096
[ 35.821156@1] wetek-dvb dvb.8: FLUSH FIFO_1
[ 35.821163@1] wetek-dvb dvb.8: FLUSH ok
[ 35.826571@1] vmap allocation for size 25169920 failed: use vmalloc=<size> to increase size.
[ 35.826601@1] wetekfb wetekfb.0: failed to ioremap wetek framebuffer
[ 35.826716@1] wetekfb: probe of wetekfb.0 failed with error -14
[ 35.827502@1] wetek-dvb dvb.8: Loading finished
[ 35.876279@1] ------------[ cut here ]------------
[ 35.876358@1] WARNING: at net/wireless/reg.c:434 regulatory_init+0x94/0x128 [cfg80211]()
[ 35.876364@1] db.txt is empty, you should update it...
[ 35.876368@1] Modules linked in: cfg80211(+) wetekdvb(PO) btrfs xor raid6_pq
[ 35.876389@1] CPU: 1 PID: 7494 Comm: modprobe Tainted: P W O 3.10.76 #3
[ 35.876424@1] [<c0013c78>] (unwind_backtrace+0x0/0xec) from [<c00115dc>] (show_stack+0x10/0x14)
[ 35.876442@1] [<c00115dc>] (show_stack+0x10/0x14) from [<c002a1dc>] (warn_slowpath_common+0x54/0x6c)
[ 35.876454@1] [<c002a1dc>] (warn_slowpath_common+0x54/0x6c) from [<c002a224>] (warn_slowpath_fmt+0x30/0x40)
[ 35.876488@1] [<c002a224>] (warn_slowpath_fmt+0x30/0x40) from [<bf0d2174>] (regulatory_init+0x94/0x128 [cfg80211])
[ 35.876517@1] [<bf0d2174>] (regulatory_init+0x94/0x128 [cfg80211]) from [<00000000>] ( (null))
[ 35.876523@1] ---[ end trace d39cd155352ac6c5 ]---
[ 35.876550@1] cfg80211: Calling CRDA to update world regulatory domain
[ 35.901895@0] dhd_module_init: Enter
[ 35.901914@0] wifi_setup_dt
[ 35.901938@0] wifi_request_32k_clk : OFF-->ON for sdio_wifi
[ 35.901947@0] clock_32k_pin(53) : (null)
[ 35.901987@0] clock_32k_pin(53) : sdio_wifi
[ 35.902453@0] interrupt_pin(52) : (null)
[ 35.902525@0] wifi_dt : gpio op failed(-1) at line 250
[ 35.902542@0] interrupt_pin(52) : sdio_wifi
[ 35.902546@0] power_on_pin(112) : (null)
[ 35.902560@0] power_on_pin(112) : sdio_wifi
[ 35.902564@0] bt_setup
[ 36.052377@1] WIFI Disable! 112
[ 36.341029@1] WIFI Enable! 112
[ 37.622283@0] [aml_sdio_timeout] time_start_cnt:992
[ 37.622283@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0xc00, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x113, virqc=0x3f003f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width=0, pdata->width=0, conf=0x416270f9, clock=400000
[ 37.622283@0] [aml_sdio_timeout] time_start_cnt:999
[ 37.622283@0] [aml_sdio_print_err] sdio: Timeout error, Cmd52 arg 0x80000c08, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width=0, pdata->width=0, conf=0x416270f9, clock=400000
[ 37.622283@0] [aml_sdio_timeout] time_start_cnt:995
[ 37.622283@0] [aml_sdio_print_err] sdio: Timeout error, Cmd8 arg 0x1aa, Xfer 0 Bytes, host->xfer_step=14, host->cmd_is_stop=0, pdata->port=0, virqs=0x13, virqc=0x3f001f00, conf->cmd_clk_divide=249, pdata->clkc=249, conf->bus_width=0, pdata->width=0, conf=0x416270f9, clock=400000
[ 39.622187@0] <4>[ 39.630431@0] sdio: queuing unknown CIS tuple 0x80 (2 bytes)
[ 39.631761@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 39.633383@0] sdio: queuing unknown CIS tuple 0x80 (3 bytes)
[ 39.635778@0] sdio: queuing unknown CIS tuple 0x80 (7 bytes)
[ 39.649513@0] sdio: new high speed SDIO card at address 0001, clock 50000000, 4-bit-bus-width
[ 39.650123@1] [sdio_reinit] finish
[ 39.650422@1] =========== WLAN placed in POWER ON ========
[ 39.650750@0] bcmsdh_register: Linux Kernel SDIO/MMC Driver
[ 39.650877@0] dhd_customer_oob_irq_map: customer specific Host GPIO number is (100)
[ 39.651577@0] dhd_conf_set_hw_oob_intr: Enable HW OOB for 43362
[ 39.653895@0] F1 signature OK, socitype:0x1 chip:0xa962 rev:0x1 pkg:0x9
[ 39.654578@0] DHD: dongle ram size is set to 245760(orig 245760) at 0x0
[ 39.655140@0] dhdsdio_probe: Disable prop_txstatus
[ 39.655638@0] wl_create_event_handler(): thread:wl_event_handler:212e started
[ 39.655641@1] tsk Enter, tsk = 0xefd3c4cc
[ 39.655663@0] init wlan_priv_wake
[ 39.655710@0] dhd_attach(): thread:dhd_watchdog_thread:212f started
[ 39.655748@0] dhd_attach(): thread:dhd_dpc:2130 started
[ 39.655787@0] dhd_attach(): thread:dhd_sysioc:2131 started
[ 39.656644@0] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:11:22:33
[ 39.656747@0] =========== WLAN placed in RESET ========
[ 39.656763@0] init wifi power_wake lock
[ 39.656916@0]
[ 39.656916@0] Dongle Host Driver, version 1.88.45.4 (r420671)
[ 39.656916@0] Compiled in drivers/net/wireless/bcmdhd on Dec 1 2015 at 16:39:39
[ 39.656927@0] dhd_module_init: Exit error=0
[ 39.664139@0] rtk_btusb: Realtek Bluetooth USB driver ver 2.11
[ 39.664332@0] usbcore: registered new interface driver rtk_btusb
[ 39.834018@1] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 41.885309@0] systemd-udevd[9750]: starting version 215
[ 41.898494@0] udevd[9750]: invalid key/value pair in file /etc/udev/rules.d/98-wetek-oe-remote.rules on line 1,starting at character 1 ('#')
[ 41.898525@0] udevd[9750]: hint: comments can only start at beginning of line
[ 42.046003@0] udevd[10036]: failed to execute '/lib/udev/wakeup_enable' 'wakeup_enable': No such file or directory
[ 42.059949@1] udevd[10038]: failed to execute '/lib/udev/wakeup_enable' 'wakeup_enable': No such file or directory
Users Online