Moinsen,
ich arbeite mich durch die Neuinstallation der 5.4 auf dem RP3. Welchen lirc-Treiber muß ich für den folgenden IR-Empfänger einstellen:
[ 5160.990118] usb 1-1.5.4: new full-speed USB device number 11 using dwc_otg
[ 5161.125702] usb 1-1.5.4: New USB device found, idVendor=0471, idProduct=060c, bcdDevice= 1.01
[ 5161.125724] usb 1-1.5.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5161.125737] usb 1-1.5.4: Product: BB+ Dongle(e.d)
[ 5161.125778] usb 1-1.5.4: Manufacturer:
[ 5161.125791] usb 1-1.5.4: SerialNumber: GOJI
[ 5161.128585] Registered IR keymap rc-rc6-mce
[ 5161.180390] rc rc0: Media Center Ed. eHome Infrared Remote Transceiver (0471:060c) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/rc/rc0
[ 5161.181162] input: Media Center Ed. eHome Infrared Remote Transceiver (0471:060c) as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5.4/1-1.5.4:1.0/rc/rc0/input8
[ 5161.481183] mceusb 1-1.5.4:1.0: long-range (0x1) receiver active
[ 5161.570102] mceusb 1-1.5.4:1.0: Registered BB+ Dongle(e.d) with mce emulator interface version 1
[ 5161.570136] mceusb 1-1.5.4:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
[ 5161.962790] input: eventlircd as /devices/virtual/input/input9
"mode2" gibt dieses aus:
Using driver default on device auto
Cannot initiate device /dev/lirc0
Grüße vom Wolf