Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - uwe67

1
Allgemein [ General ] / Fernbedienung: yausbir.service: Failed with result 'exit-code'.
« on: February 12, 2025, 17:12:42 »
Danke schön, werde ich am Wochenende testen.  :D

2
Allgemein [ General ] / Fernbedienung: yausbir.service: Failed with result 'exit-code'.
« on: February 10, 2025, 14:48:12 »
Ich kenne mich nicht mit der yausbir.conf oder yaUsbir.py aus, ist nicht von mir.

Der Fehler ist in der yaUsbir.py, ab Python 3.2 gibt es kein SafeConfigParser.

Gruß Uwe


3
Allgemein [ General ] / Fernbedienung: yausbir.service: Failed with result 'exit-code'.
« on: February 10, 2025, 14:10:57 »
Hallo,

ich habe gestern 6.x frisch installiert, somit sind die Dateien original.
Somit ist yausbir.conf unverändert.

Oder welche Datei meinst du?

Gruß Uwe

4
Allgemein [ General ] / Fernbedienung: yausbir.service: Failed with result 'exit-code'.
« on: February 10, 2025, 12:56:30 »
Hallo, ich versuche gerade meinen ;D alten yaUSBir zu reaktivieren.

Im Log Steht:
yausbir.service: Failed with result 'exit-code'.

Wenn ich es manuell Aufrufe:
Code: [Select]
root@dvb16:~# /usr/lib/yausbir/yaUsbir.py -s /var/run/lirc/lircd-yausbir -k /etc/yausbir.conf
enabled protocols: ['RC-5', 'RC-6', 'NEC', 'SAMSUNG']
reading keymap /etc/yausbir.conf
Traceback (most recent call last):
  File "/usr/lib/yausbir/yaUsbir.py", line 76, in <module>
    output = Output(options.socket, 'lirc', options.keymap)
             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/yausbir/output.py", line 15, in __init__
    self.keymap = Keymap(keymap)
                  ^^^^^^^^^^^^^^
  File "/usr/lib/yausbir/output.py", line 110, in __init__
    self.parser = configparser.SafeConfigParser(delimiters=(" ","\t"))
                  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
AttributeError: module 'configparser' has no attribute 'SafeConfigParser'. Did you mean: 'RawConfigParser'?
Auch der Pfad /var/run/lirc ist nicht vorhanden.

Gibt's da ein yaUsbir.py Update ?

Gruß Uwe

5
Allgemein [ General ] / [MLD 5.4 stable] TBS 5990 / Unable to find symbol tas2101_attach()
« on: May 02, 2020, 12:35:43 »
Hallo Roland,
und das Debug-Log.
Gruß Uwe

6
Allgemein [ General ] / [MLD 5.4 stable] TBS 5990 / Unable to find symbol tas2101_attach()
« on: May 02, 2020, 11:27:54 »
Hallo Roland,

Danke für deine Hilfe!

laut xlog ist 340.108 installiert. Ich habe bei der Installation nichts weiters angegeben. Laut Web-Interface ist unter "Einen Grafik Treiber installieren:" "nvidia.legacy (ist installiert)" gewählt.
Code: [Select]
MLD> modinfo nvidia
filename:       /lib/modules/5.6.8.202.63/kernel/drivers/video/nvidia.ko
license:        NVIDIA
version:        340.108
alias:          char-major-195-*
alias:          pci:v000010DEd00000E00sv*sd*bc04sc80i00*
alias:          pci:v000010DEd00000AA3sv*sd*bc0Bsc40i00*
alias:          pci:v000010DEd*sv*sd*bc03sc02i00*
alias:          pci:v000010DEd*sv*sd*bc03sc00i00*
depends:        drm
vermagic:       5.6.8.202.63 SMP mod_unload modversions

Gruß Uwe

7
Allgemein [ General ] / [MLD 5.4 stable] TBS 5990 / Unable to find symbol tas2101_attach()
« on: May 01, 2020, 20:25:23 »
Hallo Roland,
Ja mit 5.5 werden die Geräte angelegt:
Code: [Select]
MLD> ls -all -r /dev/dvb/adapter*
/dev/dvb/adapter1:
crw-rw----    1 root     video     212,   9 May  1 20:08 net0
crw-rw----    1 root     video     212,   5 May  1 20:08 frontend0
crw-rw----    1 root     video     212,   8 May  1 20:08 dvr0
crw-rw----    1 root     video     212,   7 May  1 20:08 demux0
crw-rw----    1 root     video     212,   6 May  1 20:08 ca0
drwxr-xr-x    4 root     root            80 May  1 20:08 ..
drwxr-xr-x    2 root     root           140 May  1 20:08 .

/dev/dvb/adapter0:
crw-rw----    1 root     video     212,   4 May  1 20:08 net0
crw-rw----    1 root     video     212,   0 May  1 20:08 frontend0
crw-rw----    1 root     video     212,   3 May  1 20:08 dvr0
crw-rw----    1 root     video     212,   2 May  1 20:08 demux0
crw-rw----    1 root     video     212,   1 May  1 20:08 ca0
drwxr-xr-x    4 root     root            80 May  1 20:08 ..
drwxr-xr-x    2 root     root           140 May  1 20:08 .
MLD>

Aber ich habe kein Bild  & OSD mit softhddevice. Sehe nur das Bootlogo (MLD HD mit Maus).

MB ist ASUS AT3IONT-I. Das mit Nvidia 340.x sehr gut funktioniert. Anbei Logs.


Grüße Uwe

8
Allgemein [ General ] / [MLD 5.4 stable] TBS 5990 / Unable to find symbol tas2101_attach()
« on: May 01, 2020, 19:28:49 »
Bei MLD 5.4 64Bit unstable geht es auch nicht, auch hier wird kein /dev/dvb/adapter erzeugt.
Code: [Select]
May  1 19:24:00 MLD user.info kernel: [  235.237219] usb 2-2: new high-speed USB device number 5 using ehci-pci
May  1 19:24:00 MLD user.info kernel: [  235.375113] usb 2-2: New USB device found, idVendor=734c, idProduct=5990, bcdDevice=40.01
May  1 19:24:00 MLD user.info kernel: [  235.375120] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May  1 19:24:00 MLD user.info kernel: [  235.375124] usb 2-2: Manufacturer: Turbosight Technolog
May  1 19:24:00 MLD user.info kernel: [  235.389496] Registered IR keymap rc-rc6-mce
May  1 19:24:00 MLD user.info kernel: [  235.413323] rc rc0: TurboSight TBS 5990 (cx231xx) MCE IR (734c:5990) as /devices/pci0000:00/0000:00:06.1/usb2/2-2/2-2:1.0/rc/rc0
May  1 19:24:00 MLD user.info kernel: [  235.413510] input: TurboSight TBS 5990 (cx231xx) MCE IR (734c:5990) as /devices/pci0000:00/0000:00:06.1/usb2/2-2/2-2:1.0/rc/rc0/input12
May  1 19:24:00 MLD user.info kernel: [  235.547626] mceusb 2-2:1.0: long-range (0x1) receiver active
May  1 19:24:01 MLD user.info kernel: [  235.583252] mceusb 2-2:1.0: Registered Turbosight Technolog with mce emulator interface version 1
May  1 19:24:01 MLD user.info kernel: [  235.583258] mceusb 2-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
May  1 19:24:01 MLD user.info kernel: [  235.587805] cx231xx 2-2:1.1: New device Turbosight Technolog  @ 480 Mbps (734c:5990) with 8 interfaces
May  1 19:24:01 MLD user.info kernel: [  235.587989] cx231xx 2-2:1.1: Identified as TurboSight TBS 5990 (card=27)
May  1 19:24:01 MLD user.info kernel: [  235.589555] i2c i2c-5: Added multiplexed i2c bus 7
May  1 19:24:01 MLD user.info kernel: [  235.589873] i2c i2c-5: Added multiplexed i2c bus 8
May  1 19:24:01 MLD user.err kernel: [  235.706901] cx231xx 2-2:1.1: cx25840 subdev registration failure
May  1 19:24:01 MLD user.info kernel: [  235.706910] cx231xx 2-2:1.1: v4l2 driver version 0.0.3
May  1 19:24:01 MLD user.info kernel: [  235.742004] cx231xx 2-2:1.1: Unknown tuner type configuring SIF
May  1 19:24:01 MLD user.info kernel: [  235.750619] cx231xx 2-2:1.1: Registered video device video0 [v4l2]
May  1 19:24:01 MLD user.info kernel: [  235.750808] cx231xx 2-2:1.1: Registered VBI device vbi0
May  1 19:24:01 MLD user.info kernel: [  236.090612] i2c i2c-8: av201x: Airoha Technology AV201x successfully attached
May  1 19:24:01 MLD user.info kernel: [  236.234593] cx231xx 2-2:1.1: MAC address ff:ff:ff:ff:ff:ff
May  1 19:24:01 MLD user.info kernel: [  236.234600] dvbdev: DVB: registering new adapter (cx231xx #0)
May  1 19:24:01 MLD user.info kernel: [  236.234608] cx231xx 2-2:1.1: DVB: registering adapter 0 frontend 0 (Tmax TAS2101)...
May  1 19:24:01 MLD user.warn kernel: [  236.236074] tbscxci: Initializing TBS CX CI#0 slot
May  1 19:24:01 MLD user.warn kernel: [  236.236854] tbscxci: Adapter 0 CI slot initialized
May  1 19:24:01 MLD user.warn kernel: [  236.237462] tbscxci: Adapter 0 CI slot disabled
May  1 19:24:02 MLD user.info kernel: [  236.567902] i2c i2c-6: av201x: Airoha Technology AV201x successfully attached
May  1 19:24:02 MLD user.info kernel: [  236.707305] cx231xx 2-2:1.1: MAC address ff:ff:ff:ff:ff:ff
May  1 19:24:02 MLD user.info kernel: [  236.707310] dvbdev: DVB: registering new adapter (cx231xx #0)
May  1 19:24:02 MLD user.info kernel: [  236.707318] cx231xx 2-2:1.1: DVB: registering adapter 1 frontend 0 (Tmax TAS2101)...
May  1 19:24:02 MLD user.warn kernel: [  236.708554] tbscxci: Initializing TBS CX CI#1 slot
May  1 19:24:02 MLD user.warn kernel: [  236.709003] tbscxci: Adapter 1 CI slot initialized
May  1 19:24:02 MLD user.warn kernel: [  236.709664] tbscxci: Adapter 1 CI slot disabled
May  1 19:24:02 MLD user.info kernel: [  236.710574] cx231xx 2-2:1.1: Successfully loaded cx231xx-dvb
May  1 19:24:02 MLD user.info kernel: [  236.710788] cx231xx 2-2:1.1: video EndPoint Addr 0x84, Alternate settings: 5
May  1 19:24:02 MLD user.info kernel: [  236.710795] cx231xx 2-2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
May  1 19:24:02 MLD user.info kernel: [  236.710801] cx231xx 2-2:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
May  1 19:24:02 MLD user.info kernel: [  236.710806] cx231xx 2-2:1.1: TS EndPoint Addr 0x81, Alternate settings: 6
May  1 19:24:02 MLD user.info kernel: [  236.710811] cx231xx 2-2:1.1: TS EndPoint Addr 0x82, Alternate settings: 6
May  1 19:24:02 MLD user.warn kernel: [  236.710831] usb 2-2: Decoder not found
May  1 19:24:02 MLD user.info kernel: [  236.710836] cx231xx 2-2:1.1: V4L2 device vbi0 deregistered
May  1 19:24:02 MLD user.info kernel: [  236.711038] cx231xx 2-2:1.1: V4L2 device video0 deregistered
May  1 19:24:02 MLD user.warn kernel: [  236.713492] cx231xx: probe of 2-2:1.1 failed with error -22

9
Allgemein [ General ] / [MLD 5.4 stable] TBS 5990 / Unable to find symbol tas2101_attach()
« on: May 01, 2020, 18:41:24 »
Hallo,

ich wollte von MLD 5.3 stable 32Bit auf MLD5.4 64Bit updaten (durch Neuinstallation). Leider funktioniert unter MLD 5.4 stable (und testing) die TBS 5990 nicht mehr. Unter /dev/dvb/adapter werden keine DVB-Geräte erstellt.
Dabei habe bei allen das Paket dvb-mb angewählt. Mit Paket dvb (DVB Treiber aus dem Linux Kernel) wird die TBS 5990 nicht erkannt.

Folgende Meldungen habe ich unter MLD 5.4 64Bit stable und dvb-mb:
Code: [Select]
May  1 17:21:51 MLD user.info kernel: [    9.552596] cx231xx 2-2:1.1: New device Turbosight Technolog  @ 480 Mbps (734c:5990) with 8 interfaces
May  1 17:21:51 MLD user.info kernel: [    9.552787] cx231xx 2-2:1.1: Identified as TurboSight TBS 5990 (card=27)
May  1 17:21:51 MLD user.info kernel: [    9.554666] i2c i2c-2: Added multiplexed i2c bus 4
May  1 17:21:51 MLD user.info kernel: [    9.554989] i2c i2c-2: Added multiplexed i2c bus 5
May  1 17:21:52 MLD user.info kernel: [    9.691020] cx25840 1-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0)
May  1 17:21:54 MLD user.info kernel: [   11.763382] cx25840 1-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
May  1 17:21:54 MLD user.info kernel: [   11.797642] cx231xx 2-2:1.1: v4l2 driver version 0.0.3
May  1 17:21:54 MLD user.info kernel: [   11.856885] cx231xx 2-2:1.1: Unknown tuner type configuring SIF
May  1 17:21:54 MLD user.info kernel: [   11.885151] cx231xx 2-2:1.1: Registered video device video0 [v4l2]
May  1 17:21:54 MLD user.info kernel: [   11.885297] cx231xx 2-2:1.1: Registered VBI device vbi0
May  1 17:21:54 MLD user.info kernel: [   11.885305] cx231xx 2-2:1.1: video EndPoint Addr 0x84, Alternate settings: 5
May  1 17:21:54 MLD user.info kernel: [   11.885313] cx231xx 2-2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
May  1 17:21:54 MLD user.info kernel: [   11.885317] cx231xx 2-2:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
May  1 17:21:54 MLD user.info kernel: [   11.885322] cx231xx 2-2:1.1: TS EndPoint Addr 0x81, Alternate settings: 6
May  1 17:21:54 MLD user.info kernel: [   11.885327] cx231xx 2-2:1.1: TS EndPoint Addr 0x82, Alternate settings: 6
May  1 17:21:54 MLD user.info kernel: [   11.886666] usbcore: registered new interface driver cx231xx
May  1 17:21:54 MLD user.err kernel: [   11.908303] WARNING: You are using an experimental version of the media stack.
May  1 17:21:54 MLD user.err kernel: [   11.908303] As the driver is backported to an older kernel, it doesn't offer
May  1 17:21:54 MLD user.err kernel: [   11.908303] enough quality for its usage in production.
May  1 17:21:54 MLD user.err kernel: [   11.908303] Use it with care.
May  1 17:21:54 MLD user.err kernel: [   11.908303] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
May  1 17:21:54 MLD user.err kernel: [   11.908303]
May  1 17:21:54 MLD user.err kernel: [   12.196650] DVB: Unable to find symbol tas2101_attach()
May  1 17:21:54 MLD user.err kernel: [   12.196662] cx231xx 2-2:1.1: Failed to attach demod tas2101 0
May  1 17:21:54 MLD user.info kernel: [   12.196879] cx231xx 2-2:1.1: Cx231xx dvb Extension initialized

MLD 5.4 64Bit testing und dvb-mb:
Code: [Select]
May  1 18:08:22 MLD user.err kernel: [  393.262569] WARNING: You are using an experimental version of the media stack.
May  1 18:08:22 MLD user.err kernel: [  393.262569] As the driver is backported to an older kernel, it doesn't offer
May  1 18:08:22 MLD user.err kernel: [  393.262569] enough quality for its usage in production.
May  1 18:08:22 MLD user.err kernel: [  393.262569] Use it with care.
May  1 18:08:22 MLD user.err kernel: [  393.262569] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
May  1 18:08:22 MLD user.err kernel: [  393.262569]
May  1 18:08:22 MLD user.info kernel: [  393.305669] Registered IR keymap rc-rc6-mce
May  1 18:08:22 MLD user.info kernel: [  393.316994] IR RC6 protocol handler initialized
May  1 18:08:22 MLD daemon.err kernel: [  393.325248] udevd[12466]: failed to execute '/lib/udev/wakeup_enable' 'wakeup_enable': No such file or directory
May  1 18:08:22 MLD user.info kernel: [  393.366970] rc rc0: TurboSight TBS 5990 (cx231xx) MCE IR (734c:5990) as /devices/pci0000:00/0000:00:06.1/usb2/2-2/2-2:1.0/rc/rc0
May  1 18:08:22 MLD user.info kernel: [  393.367185] input: TurboSight TBS 5990 (cx231xx) MCE IR (734c:5990) as /devices/pci0000:00/0000:00:06.1/usb2/2-2/2-2:1.0/rc/rc0/input12
May  1 18:08:23 MLD user.info kernel: [  393.507518] mceusb 2-2:1.0: long-range (0x1) receiver active
May  1 18:08:23 MLD user.info kernel: [  393.549883] mceusb 2-2:1.0: Registered Turbosight Technolog with mce emulator interface version 1
May  1 18:08:23 MLD user.info kernel: [  393.549894] mceusb 2-2:1.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x1 active)
May  1 18:08:23 MLD user.info kernel: [  393.550394] usbcore: registered new interface driver mceusb
May  1 18:08:23 MLD user.info kernel: [  393.579228] mc: Linux media interface: v0.10
May  1 18:08:23 MLD user.info kernel: [  393.594239] videodev: Linux video capture interface: v2.00
May  1 18:08:23 MLD user.err kernel: [  393.594247] WARNING: You are using an experimental version of the media stack.
May  1 18:08:23 MLD user.err kernel: [  393.594247] As the driver is backported to an older kernel, it doesn't offer
May  1 18:08:23 MLD user.err kernel: [  393.594247] enough quality for its usage in production.
May  1 18:08:23 MLD user.err kernel: [  393.594247] Use it with care.
May  1 18:08:23 MLD user.err kernel: [  393.594247] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
May  1 18:08:23 MLD user.err kernel: [  393.594247]
May  1 18:08:23 MLD user.info kernel: [  393.616042] cx231xx 2-2:1.1: New device Turbosight Technolog  @ 480 Mbps (734c:5990) with 8 interfaces
May  1 18:08:23 MLD user.info kernel: [  393.616203] cx231xx 2-2:1.1: Identified as TurboSight TBS 5990 (card=27)
May  1 18:08:23 MLD user.info kernel: [  393.620259] i2c i2c-5: Added multiplexed i2c bus 7
May  1 18:08:23 MLD user.info kernel: [  393.620404] i2c i2c-5: Added multiplexed i2c bus 8
May  1 18:08:23 MLD user.info kernel: [  393.755770] cx25840 4-0044: cx23102 A/V decoder found @ 0x88 (cx231xx #0-0)
May  1 18:08:23 MLD user.info kernel: [  394.059519] i2c /dev entries driver
May  1 18:08:25 MLD user.info kernel: [  395.852932] cx25840 4-0044: loaded v4l-cx231xx-avcore-01.fw firmware (16382 bytes)
May  1 18:08:25 MLD user.info kernel: [  395.887079] cx231xx 2-2:1.1: v4l2 driver version 0.0.3
May  1 18:08:25 MLD user.info kernel: [  395.949221] cx231xx 2-2:1.1: Unknown tuner type configuring SIF
May  1 18:08:25 MLD user.info kernel: [  395.977364] cx231xx 2-2:1.1: Registered video device video0 [v4l2]
May  1 18:08:25 MLD user.info kernel: [  395.977508] cx231xx 2-2:1.1: Registered VBI device vbi0
May  1 18:08:25 MLD user.info kernel: [  395.977516] cx231xx 2-2:1.1: video EndPoint Addr 0x84, Alternate settings: 5
May  1 18:08:25 MLD user.info kernel: [  395.977522] cx231xx 2-2:1.1: VBI EndPoint Addr 0x85, Alternate settings: 2
May  1 18:08:25 MLD user.info kernel: [  395.977527] cx231xx 2-2:1.1: sliced CC EndPoint Addr 0x86, Alternate settings: 2
May  1 18:08:25 MLD user.info kernel: [  395.977532] cx231xx 2-2:1.1: TS EndPoint Addr 0x81, Alternate settings: 6
May  1 18:08:25 MLD user.info kernel: [  395.977537] cx231xx 2-2:1.1: TS EndPoint Addr 0x82, Alternate settings: 6
May  1 18:08:25 MLD user.info kernel: [  395.978072] usbcore: registered new interface driver cx231xx
May  1 18:08:25 MLD user.err kernel: [  395.991234] WARNING: You are using an experimental version of the media stack.
May  1 18:08:25 MLD user.err kernel: [  395.991234] As the driver is backported to an older kernel, it doesn't offer
May  1 18:08:25 MLD user.err kernel: [  395.991234] enough quality for its usage in production.
May  1 18:08:25 MLD user.err kernel: [  395.991234] Use it with care.
May  1 18:08:25 MLD user.err kernel: [  395.991234] Latest git patches (needed if you report a bug to linux-media@vger.kernel.org):
May  1 18:08:25 MLD user.err kernel: [  395.991234]
May  1 18:08:25 MLD daemon.err kernel: [  396.069224] udevd[12571]: failed to execute '/lib/udev/wakeup_enable' 'wakeup_enable': No such file or directory
May  1 18:08:25 MLD user.info kernel: [  396.093309] input: eventlircd as /devices/virtual/input/input13
May  1 18:08:25 MLD daemon.err kernel: [  396.161563] udevd[12581]: failed to execute '/lib/udev/wakeup_enable' 'wakeup_enable': No such file or directory
May  1 18:08:25 MLD daemon.err kernel: [  396.186043] udevd[12583]: failed to execute '/lib/udev/wakeup_enable' 'wakeup_enable': No such file or directory
May  1 18:08:25 MLD user.err kernel: [  396.235170] DVB: Unable to find symbol tas2101_attach()
May  1 18:08:25 MLD user.err kernel: [  396.235185] cx231xx 2-2:1.1: Failed to attach demod tas2101 0
May  1 18:08:25 MLD user.info kernel: [  396.235420] cx231xx 2-2:1.1: Cx231xx dvb Extension initialized

Kann da mir einer weiterhelfen?

Gruss Uwe

10
Entwicklung [ Development ] / MLD 5.5 magick Assertion
« on: April 16, 2020, 19:54:25 »
Geht jetzt, DANKE!

11
Entwicklung [ Development ] / MLD 5.5 magick Assertion
« on: April 13, 2020, 16:43:00 »
Hallo,

Heute habe ich MLD 5.5 neu zum testen installiert.
Sobald ich das VDR Plugin skinnopacity oder tvscraper aktiviere habe ich folgendes im VDR-Log:
Code: [Select]
vdr: magick/semaphore.c:606: LockSemaphoreInfo: Assertion `semaphore_info != (SemaphoreInfo *) NULL' failed.
Aborted
VDR exits at Mo Apr 13 15:47:14 CEST 2020

Und der VDR startet immer wieder neu.

Gibt es da eine Lösung?

Gruß Uwe